Modified Sine Wave 100 VA UPS
The battery voltage is analyzed and, when it is discharged, switches to a cyclical energy-saving operation mode (20 s, 20 s pause), the LED "WARNING" lights up for 20 s. When the battery is fully discharged, the UPS switches itself off and the LED "DC12V" goes out. Electronic protection of the built-in battery and the output from short circuit and overload (when battery operation) is provided. It is also possible to switch on an external battery. When overloading, the LED "CAUTION" flashes.
Model |
100 EPF |
Purpose |
For regular pumps 100W |
Output power when operating the battery |
Up to 100 VA |
Output voltage |
220 V 10%, 50 Hz |
Switching time (ms) |
< 500 |
Built-in battery |
12 V / 7Ah |
The built-in battery is only installed on request |
Yes |
Current charge of the battery |
1 A |
Electronic protections when operating an accumulator |
Ouput - short circuit and overload; |
Battery - short circuit and recharge |
|
Fuse protection |
grid and outlet |
Power supply voltage |
160-240 VAC |
Box material |
Metal |
Dimensions |
175 x 160 x 70 mm |
Weight |
1.5 kg. |
To avoid paying expensive shipping, the announced price and weight are without a built-in battery. You can buy a standard 12 V / 7 Ah battery from a local store and connect it yourself. Or connect only an external battery without connecting an internal battery. If you would like to add a built-in battery, please add it to your cart HERE